October 24, 2026 · 3 min read
Pouring concrete in cold weather around San Antonio
Mild winters make it easy to forget, but fresh concrete that freezes is damaged for good. Here's how winter pours get done right.
San Antonio doesn’t get much real winter. Most days from December to February are fine for concrete work, and plenty of homeowners use the slower season to get a patio or driveway done before spring. The catch is the handful of nights each year that drop below freezing. Fresh concrete that freezes is damaged, and it doesn’t recover.
Why cold matters to fresh concrete
Concrete hardens through a chemical reaction between cement and water. That reaction slows down a lot as temperatures drop, and it nearly stops near freezing.
The bigger problem is the water itself. Fresh concrete is full of it. If that water freezes before the concrete has gained enough strength, it expands and breaks the structure from the inside. The result can be a surface that scales and flakes, or a slab that never reaches its design strength.
Once concrete has cured for a few days in decent weather, it’s strong enough to handle a freeze. The risk is concentrated in the first days after the pour.
How cold is too cold
The American Concrete Institute treats cold weather as a condition where temperatures are expected to fall to around 40 degrees or lower while the concrete is being protected. In practice, that’s when crews start taking extra steps.
Around San Antonio, the risk is usually a cold front that drops overnight lows into the 20s or 30s for a night or two. Boerne and the higher ground to the north tend to run a few degrees colder than the city, so a forecast low of 34 in town can mean freezing out there.
How crews handle a winter pour
Watch the forecast
The first step is the simplest. Look at the forecast for the pour day and the next several nights. If a hard freeze is coming in the first couple of days, move the pour. A week’s delay costs nothing compared with a damaged slab.
Don’t pour on frozen or muddy ground
Concrete placed on frozen ground cures unevenly and can settle when the ground thaws. After a long wet spell, the base may need to dry out or be reworked before it can be poured on.
Adjust the mix
Ready mix plants can supply concrete made with heated water, and can add accelerating admixtures that speed up the early strength gain. Both help the slab get through the vulnerable window faster.
Cover it
Insulated curing blankets go over the slab after finishing, especially overnight. They hold in the heat the concrete produces as it cures. On a cold night, that’s often all it takes. Plastic sheeting under the blankets helps keep moisture in.
Leave forms on longer
Forms help insulate the edges. In cold weather, they often stay on a bit longer.
Wait longer before loading
Cold weather slows strength gain, so the usual waits for foot traffic and vehicles stretch out. Our post on when you can drive on new concrete has the normal timeline, and a winter pour will usually run longer than that.
What not to do
- Don’t let anyone add extra water to make the concrete easier to work in the cold. It weakens the slab and makes freeze damage worse.
- Don’t use deicing salt on new concrete in its first year. It can damage the surface.
- Don’t pull blankets early just because the afternoon was sunny. The night is what matters.
Why winter can be a good time
Cold is a manageable problem. Heat is often the harder one here. In a San Antonio summer, concrete sets fast, the surface dries out, and crews are racing the sun. Cool, overcast winter days are often easier on finishing and curing, as long as the cold nights are planned for.
Winter is also when contractors are less booked, so scheduling is easier, and a patio poured in January is ready well before spring.
What to ask before a winter pour
- What will you do if a freeze is forecast in the first few days?
- Will the slab be covered with insulated blankets overnight?
- Will you use heated water or an accelerator if it’s cold?
- How long should we wait before walking and driving on it?
If you’re in Boerne or anywhere in our area and want a project done this winter, call or text (210) 761-6960 for a written estimate.
Sources and further reading
Want someone to look at it?
Free estimate. Tell us about the job.
Rather talk? Call or text (210) 761-6960
FAQ
Common questions
What temperature is too cold to pour concrete?
There isn't one magic number, but crews take special steps once nights near or below about 40 degrees are expected during the first few days. The real rule is that the concrete itself must not freeze before it has gained enough strength.
Is winter a bad time to pour a driveway or patio in San Antonio?
Not usually. Most winter days here are mild, and cool weather is easier on curing than summer heat. It just takes more attention to the forecast and protection on the few cold nights.
What happens if fresh concrete freezes?
Water in the concrete expands as it freezes and damages the structure before it has hardened. The surface can scale and flake, and the slab can end up weaker overall. The damage doesn't heal once it warms up.
Get a written estimate
Free estimates across San Antonio and the Hill Country.
Request an estimateOr call or text (210) 761-6960