FlowTex Concrete logo

November 17, 2026 · 3 min read

Sealing concrete in San Antonio: when, why, and with what

Sealer protects color and keeps water out. Here's which type fits your slab and when to put it down.

Sealer is the cheapest maintenance a concrete surface gets, and the most skipped. On stamped and stained work, it’s what keeps the color looking like it did the day it was poured. On plain concrete, it’s optional but useful.

What sealer does

Concrete is porous. Water, oil, and dirt soak into it. On clay soil, water that soaks through joints and cracks also reaches the base. Sealer slows all of that down.

On decorative concrete, sealer also protects the color and the surface texture from UV and wear, and brings out depth in the color. Without it, stamped concrete fades and looks chalky.

The two main types

Penetrating sealers

These soak into the surface and react with the concrete, leaving no visible film. Silane and siloxane products are common. They repel water and help resist stains, keep a natural, flat look, and don’t make the surface slick. They last a long time because there’s no film to wear off.

They won’t add color or sheen. Good choice for plain driveways, walks, and anywhere you want the concrete to look like concrete.

Film forming sealers

These leave a thin coat on top. Acrylics are the most common for outdoor residential work. They deepen color, add a satin or glossy look, and protect the surface from wear.

The film wears down over time, especially where people walk and cars turn, and it needs recoating. Glossy films can also be slippery when wet.

This is what most stamped and stained patios get, because it makes the color pop.

PenetratingFilm forming (acrylic)
LookNatural, no shineWet look, satin to gloss
Color boostNoneYes
Slip when wetUnchangedCan be slick
LifespanLongerShorter, needs recoats
Best forPlain drives and walksStamped and stained work

When to seal new concrete

Concrete needs to cure before most sealers go on. Many products call for about a month. Sealing too early can trap moisture and leave a cloudy, white finish.

Some products are designed to cure and seal at once and go on right after finishing. Which one fits depends on the job. Always follow the label.

How often to reseal

For stamped concrete with an acrylic sealer, every two to three years is typical. Pool decks and surfaces in full sun usually need it sooner. Penetrating sealers on plain concrete can go longer.

Easy test: sprinkle water on the surface. If it beads up, the sealer is working. If it soaks in and darkens the concrete, it’s time.

Texas heat changes the job

Sealer is sensitive to surface temperature. On a summer afternoon, a slab in direct sun can be far hotter than the air. Sealer applied to a hot surface can bubble, dry too fast, or leave lap marks.

Seal early in the morning, in spring or fall, or on a mild overcast day. Avoid rain in the forecast for at least a day. Apply thin coats. Two thin coats beat one thick one, which can turn cloudy or peel.

Clean first

Sealer locks in whatever is on the surface. Before sealing:

  • Pressure wash the surface and let it dry completely.
  • Remove oil and rust stains with the right cleaner.
  • Strip old sealer if it’s peeling or cloudy.

Pool decks and steps

Around pools, the surface gets wet constantly and people walk barefoot. Use a sealer with an anti slip additive, or choose a penetrating product that doesn’t change the texture. Lighter colors also stay cooler under bare feet.

Older stamped patios

If you’re in Castle Hills or elsewhere in our area and have an older stamped patio that’s faded, cleaning and resealing may bring a lot of the color back. Our stamped concrete page covers new work, and our post on stamped concrete vs pavers covers what upkeep to expect over the long run.

For a written estimate, call or text (210) 761-6960.

Sources and further reading

Want someone to look at it?

Free estimate. Tell us about the job.

Rather talk? Call or text (210) 761-6960

FAQ

Common questions

How soon can you seal new concrete?

Follow the sealer's label. Many sealers call for the concrete to cure about a month first, while some curing and sealing products go on the day of the pour. Sealing too early can trap moisture and leave a cloudy finish.

How often should stamped concrete be resealed?

Usually every two to three years, sooner on pool decks and areas in full sun. When water stops beading and the color looks dull or chalky, it's time.

Does sealer make concrete slippery?

Glossy film forming sealers can be slick when wet. On pool decks, walkways and steps, an anti slip additive mixed into the sealer adds grip without changing the look much.

Get a written estimate

Free estimates across San Antonio and the Hill Country.

Request an estimate

Or call or text (210) 761-6960